How to Sand Drywall? ( Easy Techniques)

It might seem to you that sanding drywall is a piece of cake, but it’s time for you to snap out of the illusion. A lot of hard work and time needs to be invested in order to get your desired result. If you are unsure of how to carry out the task, we will teach you.

In this article, we are gonna show you the step-by-step process of sanding drywall.

So, let’s jump right into our topic of discussion.

Step 1: Cover Everything Up Before Starting 

Sanding drywall can be a dirty chore. A good amount of time has to be put in just to clean the messy residues of the task. To minimize that, the floor has to be covered with a drop cloth of some sort or a painter’s paper.

Secure it in place on the bottom of the wall with the help of masking tape. This technique should be able to prevent dirt to fall on the floor. But do keep in mind that you will eventually have to mop up the floors after you are done.

Now, you need to wear clothes that you don’t plan on ever using again because the task is a messy one and detergent might not be able to remove the stains. Do remember to put on a paper breathing mask to be certain that inhalation of dust is averted.

For those who plan on taking the sand powering route, you have to wear safety goggles so that your eyes are protected from the sparks. Other than that, you would not be in need of goggles.

Step 2: Choose the Right Method and Types Of Equipment

There are two methods with which you can get the job completed; one is hand sanding and the other is power sanding. As the name of the latter suggests, a machine called sander is required to create abrasion with the sandpaper for a sleeker look.

This way takes up a shorter time, but it is not advised to be used at home as the powder will literally be blown everywhere and it will be almost next to impossible to get it cleaned and therefore would not be a safe environment to live in. This route is fine when one is building their homes.

The hand sanding method requires a lot of time and patience since you have to do the entire process manually. Surely, you will save yourself from the hassle of cleaning if you opt the laboring route. Sanding blocks and 60 and 150 grit papers are the perfect tools for the errand. You also have to pick up specialized sanding sheetrock and if budget is an issue here, regular paper can be utilized too.

Step 3: Prep Your Wall Further

Run your heater along the wall till you have a moderately even coat as a starter. This process might take a lengthy period of your time, but you have to do it carefully and with precision as that will be your base.

Diminish any rough edges with the help of the sheet. After you are done with the grating, you will have to see the result under a bright light to detect out any problems. A flashlight should be able to do the job just fine.

Step 4: Sanding Time

Now is the part where your real work starts. You will have to rub the sheet over the mud in a circular motion evenly in all directions to make it as regular as possible. Your eye has to be kept wide open to catch any sort of errors. It’s easy to make a surface flat but very difficult to make it smooth.

Make spiral patterns and not back and forth motion for a better result. Keep the pressure on the block same and light throughout the process so that the surface of the wall is uniform and so that flakes does not come off.

To get into difficult corners use a sponge as it can be squished into almost everything. If the dust flying around becomes an issue for you, try wetting the paper. This would ensure minimum particles moving about and provides a very sleek finish.

From the sound of it, this might seem very easy. But trust us, it’s not. Take your time and do not rush. Things might become boring as it’s a lengthy task, so take breaks in the middle.

Step 5: Clean the Setup 

It is essential to tidy up the room even if you are just done the sanding for the day. A vacuum cleaner and a mop would be sufficient to clean up the room. The entire process will take time, but it is necessary so that your health safety is maintained.

Final Words

Now that you know more or less everything about sanding drywall, we hope you don’t face any problems while doing it. Even if you do, just remember that with great resolve and exactness, you’ll be able to get ahold of the task and will be satisfied with the wall.